Invitation to Bid Shefah Group LLC 25-10
PRODUCT SPECIFICATIONS
- One (1) Hydraulic Submersible Trash Pump and
- One (1) Portable Hydraulic Power Unit Description: 6″ discharge trash pump with high efficiency two channel impeller with adjustable wear surface and ductile iron casing. Hydra-Tech model S6TC or approved equal.
Specifications: (approx.)
- A. Weight 270 lbs. (122 kg)
- B. Height 34″ (86 cm)
- C. Width (@ widest point) 20 ¾” (53 cm)
- D. Discharge 6″ NPT (F)
- E. Inlet Flange 6″ 125# ANSI
- F. Solids Handling 3″ (75 mm)
- G. Hose Ports 1″ (-16) SAE
- H. Pump Body Ductile Irin
- I. Impeller Ductile Iron
- J. Wear Ring Ductile Iron
- K. Shaft 17-4 PH Stainless Steel
- L. Shaft Seal Carbon/Ceramic (Std)
- M. Elastomers Buna N (Std)
- N. Hydraulic Oil 214-320 s.s.u. @ 100° F (64° C)
- O. Input Flow Max. 28 GPM (106 LPM)
- P. Operating Pressure Max. 2900 PSI (197 Bar)
- Q. Power Source Open Center Hydraulic System
Features:
- A. High Efficiency Closed Channel Impeller (will pass 3″ semi-solids)
- B. Compact Design
- C. Variable Speed Hydraulic Drive for wide range of performance
- D. Oil Lubricated Seals (can run dry)
- E. Adjustable Wear Ring
- F. Can Be Bolted Directly into a Pipeline or Used as a Booster Pump
- G. Safe Hydraulic Drive Can Be Used Where Power Is Hazardous or Impractical
Hydraulic Hose Set:
- A. (1) 1″ x 50′ with QD couplers B. (1) 1 ¼” x 50′ with QD couplers Portable Hydraulic Power Unit Description – Diesel engine and pressure compensated hydraulic pump for maximum versatility and enhanced performance when driving submersible pumps or other hydraulic equipment. Example: Hydra-Tech model HT74DVD or equal.
Specifications: (approx.)
- A. Engine Deutz TD 2.9 L4 Liquid Cooled Diesel (Tier 4 Final) or equal
- B. Horsepower 74 @ 2300 RPM
- C. Hydraulic Output Variable, Max. 30 GPM (114 LPM)
- D. Operating Pressure Maximum 2900 PSI (199 Bar)
- E. Hose Port Size 1″ NPT Pressure, 1 ¼” Return, ½” Case Drain
- F. Hydraulic Oil AW Biodegradable Oil
- G. Oil Filtration 10 Micron (standard)
- H. Oil Reservoir Capacity 50 U.S. Gallons (189 Liters)
- I. Fuel Tank Capacity 82 U.S. Gallons (310 Liters)
- J. Dimensions (approx.) H 78 ½” (198 cm) x W 68 ½” (174 cm) x L 135″ (343 C)
- K. Weight (Dry) 3520 lbs. (1600 kg)
Features:
- A. Highway Trailer Chassis with Built-In Extended Run Fuel Tank, Independent Suspension, D.O.T. Brakes and Lighting
- B. Single Point Lifting Bracket, Tie Downs and Stabilizer Jacks for Transport and Setup
- C. Digital Engine Control Panel with Auto-Start Capability
- D. Shutdowns for Low Hydraulic Oil Level and High Hydraulic Oil Temp
- E. Variable Piston Hydraulic Pump
- F. Efficient Hydraulic Oil Cooler
- G. Tank Top Filler/Strainer
- H. Spin-On Return Filter
- I. System Relief Valve
- J. Pressure Control Valve
- K. Liquid Filled Pressure Gauge
2.2 ORDERING PROCEDURE
Orders placed against this contract shall be in the form of a Shefah Group LLC issued purchase order(s).
2.3 DELIVERY
A. Delivery shall be FOB destination to the delivery addresses in Arkansas zip 72204. All freight, shipping and handling charges must be included in bid price. Loss or damage that occurs during shipping prior to the order being received by client shall be the vendor’s responsibility. Delivery may occur Monday through Thursday between 8:00 AM and 2:30 PM. CT.
C. Vendor shall give client immediate notice of any anticipated delays or plant shutdowns that will affect the delivery requirement.
2.5 WARRANTY
A. Vendor must provide standard manufacturers/product warranty.
2.6 ACCEPTANCE
Inspection and acceptance/rejection of product(s) will be made within 14-days of receipt. We shall have the option to return any product(s) within the 14-day timeframe for any reason. Bid must include a total satisfaction return policy for all products and shall not impose any liability on We for such returns.